Journal articles

Kiran, K., Satyanarayana, H., and Schmitz, T., 2017, Compensation of Frequency Response Function Measurements by Inverse RCSA,  International Journal of Machine Tools and Manufacture, accepted.

Honeycutt, A. and Schmitz, T., 2017, Surface Location Error and Surface Roughness for Period-n Milling Bifurcations, Journal of Manufacturing Science and Engineering, accepted.

Honeycutt, A. and Schmitz, T., 2017, Milling Stability Interrogation by Subharmonic Sampling, Journal of Manufacturing Science and Engineering, 139/4: 041009 (9 pages), http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleID=2566034.

Kiran, K., Rubeo, M., Cengiz Kayacan, M., and Schmitz, T., 2017, Two Degree of Freedom Frequency Domain Surface Location Error Prediction, Precision Engineering, 48: 234–242, http://dx.doi.org/10.1016/j.precisioneng.2016.12.006.

Rubeo, M. and Schmitz, T., 2016, Milling Force Modeling: A Comparison of Two Approaches, Procedia Manufacturing, 5: 90-105.

Honeycutt, A. and Schmitz, T., 2016, Experimental Validation of Period-n Bifurcations in Milling, Procedia Manufacturing, 5: 362-374.

Menezes, J., Rubeo, M., Kiran, K., Honeycutt, A., and Schmitz, T., 2016, Productivity Progression with Tool Wear in Titanium Milling, Procedia Manufacturing, 5: 427-441.

Tyler, C., Troutman, J., and Schmitz, T., 2016, A Coupled Dynamics, Multiple Degree of Freedom Process Damping Model, Part 1: Turning, Precision Engineering, 46: 65-72, http://dx.doi.org/10.1016/j.precisioneng.2016.03.017.

Tyler, C., Troutman, J., and Schmitz, T., 2016, A Coupled Dynamics, Multiple Degree of Freedom Process Damping Model, Part 2: Milling, Precision Engineering,  46: 73-80, http://dx.doi.org/10.1016/j.precisioneng.2016.03.018.

Honeycutt, A. and Schmitz, T., 2016, A Numerical and Experimental Investigation of Period-n Bifurcations in Milling, Journal of Manufacturing Science and Engineering, 139/1: 011003 (11 pages), doi:10.1115/1.4034138.

Rubeo, M. and Schmitz, T., 2016, Mechanistic Force Model Coefficients: A Comparison of Linear Regression and Nonlinear Optimization, Precision Engineering, 45: 311-321, doi:10.1016/j.precisioneng.2016.03.008.

Honeycutt, A. and Schmitz, T., 2016, A New Metric for Automated Stability Identification in Time Domain Milling Simulation, Journal of Manufacturing Science and Engineering, 138/7: 074501 (7 pages), doi:10.1115/1.4032586.

Lu, C., Troutman, J., Schmitz, T., Ellis, J., Tarbutton, J., 2016, Application of the Continuous Wavelet Transform in Periodic Error Compensation, Precision Engineering, 44: 245-251, doi:10.1016/j.precisioneng.2016.01.008.

Ransom, T., Honeycutt, A., and Schmitz, T., 2016, A New Tunable Dynamics Platform for Milling Experiments, Precision Engineering, 44: 252-256, http://dx.doi.org/10.1016/j.precisioneng.2016.01.005.

Honeycutt, A. and Schmitz, T., 2015, The Extended Milling Bifurcation Diagram, Procedia Manufacturing, 1: 466-476.

Chang, K., Chaudhuri, A., Rue, J.,  Haftka, R., and Ifju, P., Tyler, C., Ganguly, V., Schmitz, T., 2015, Improving the Fabrication Process of Micro-air-vehicle Flapping Wings, AIAA Journal, 53/10: 3039-3048, doi: 10.2514/1.J053884.

Schmitz, T., 2015, Investigation of Retention Knob Geometry on Machining Dynamics, Procedia Manufacturing, 1: 578-583.

Kolar, P., Fojtu, P, and Schmitz, T., 2015, On Cutting Force Coefficient Model with Respect to Tool Geometry and Tool Wear, Procedia Manufacturing, 1: 708-720.

Schmitz, T., 2015, The Microphone Feedback Analogy for Chatter in Machining, Shock and Vibration, 2015, 2015: 976819, http://dx.doi.org/10.1155/2015/976819.

Hupman, A., Abbas, A., and Schmitz, T., 2015, Incentives Versus Value in Manufacturing Systems: An Application to High-Speed Milling, Journal of Manufacturing Systems, 36:20-26, doi:10.1016/j.jmsy.2015.02.004.

Tyler, C., Troutman, J., and Schmitz, T., 2015, Radial Depth of Cut Stability Lobe Diagrams with Process Damping Effects, Precision Engineering, 40: 318-324, doi:10.1016/j.precisioneng.2014.11.004.

Childs, T., Tyler, C., Evans, C., Schmitz, T., Paul, E., and Browry, E., 2014, Estimation of Cutting Conditions in Precision Micromachining of CuNi Alloys of Varying Composition, Procedia CIRP, 14:383-388, doi: 10.1016/j.procir.2014.03.020.

Karandikar, J., Abbas, A., and Schmitz, T., 2014, Remaining Useful Tool Life Predictions in Turning using Bayesian Inference, International Journal of Prognostics and Health Management, 4/2: 025, https://www.phmsociety.org/sites/phmsociety.org/files/phm_submission/2013/ijphm_13_025.pdf.

Karandikar, J., Abbas, A., and Schmitz, T., 2014, Application of Bayesian Inference to Milling Force Modeling, Journal of Manufacturing Science and Engineering, 136/2: 021017, doi:10.1115/1.4026365, http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1812712.

Karandikar, J., Mcleay, T., Turner, S., Schmitz, T., 2014, Tool Wear Monitoring using Naïve Bayes Classifiers, International Journal of Advanced Manufacturing Technology, 75/5-8 http://link.springer.com/article/10.1007/s00170-014-6560-6.

Karandikar, J., Tyler, C., and Schmitz, T., 2014, Value of Information-Based Experimental Design: Application to Process Damping in Milling, Precision Engineering, 38/4: 799-808. http://dx.doi.org/10.1016/j.precisioneng.2014.04.008.

Graziano, A., Ganguly, V., Schmitz, T., and Yamaguchi, H., 2014, Control of Lay on Cobalt Chromium Alloy Finished Surfaces Using Magnetic Abrasive Finishing and Its Effect on Wettability, Journal of Manufacturing Science and Engineering, 136: 031016, doi:10.1115/1.4026935, http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1835289.

Karandikar, J., Traverso, M., Abbas, A., and Schmitz, T., 2014, Bayesian Inference for Milling Stability using a Random Walk Approach, Journal of Manufacturing Science and Engineering, 136: 031015, doi:10.1115/1.4027226, http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1851468.

Ganguly, V. and Schmitz, T., 2014, Phase Correction for Frequency Response Function Measurements, Precision Engineering, 38: 409–413, http://dx.doi.org/10.1016/j.precisioneng.2013.12.007.

Troutman, J., Evans, C., Ganguly, V., and Schmitz, T., 2014, Performance Evaluation of a Vibration Desensitized Scanning White Light Interferometer, Surface Topography: Metrology and Properties, 2: 014011, http://iopscience.iop.org/article/10.1088/2051-672X/2/1/014011/pdf.

Karandikar, J., Abbas, A., and Schmitz, T., 2014, Tool Life Prediction using Bayesian Updating, Part 1: Milling Tool Life Model using a Discrete Grid Method, Precision Engineering, 38: 9-17, http://dx.doi.org/10.1016/j.precisioneng.2013.06.006.

Karandikar, J., Abbas, A., and Schmitz, T., 2014, Tool Life Prediction using Bayesian Updating, Part 2: Turning Tool Life using a Markov Chain Monte Carlo Approach, Precision Engineering, 38: 18-27, http://dx.doi.org/10.1016/j.precisioneng.2013.06.007.

Ganguly, V., Schmitz, T., Graziano, A., and Yamaguchi, H., 2013, Force Measurement and Analysis for Magnetic Field-Assisted Finishing, Journal of Manufacturing Science and Engineering, 135/4: 041016, doi:10.1115/1.4023723, http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1721759.

Ganguly, V. and Schmitz, T., 2013, Spindle Dynamics Identification using Particle Swarm Optimization, Journal of Manufacturing Processes, 15/4: 444–451, http://dx.doi.org/10.1016/j.jmapro.2013.05.008.

Karandikar, J., Abbas, A., and Schmitz, T., 2013, Tool Life Prediction using Random Walk Bayesian Updating, Machining Science and Technology, 17/3: 410-442, http://www.tandfonline.com/doi/full/10.1080/10910344.2013.806103.

Tyler, C. and Schmitz, T., 2013, Analytical Process Damping Stability Prediction, Journal of Manufacturing Processes, 15: 69-76, http://dx.doi.org/10.1016/j.jmapro.2012.11.006.

Kim, H.S. and Schmitz, T., 2013, Shear Strength Evaluation of Hydroxide Catalysis Bonds for Glass-Glass and

Glass-Aluminum Assemblies, Precision Engineering, 37: 23-32, http://dx.doi.org/10.1016/j.precisioneng.2012.06.004.

Karandikar, J., Kim, N.H., and Schmitz, T., 2012, Prediction of Remaining Useful Life for Fatigue-damaged Structures using Bayesian Inference, Engineering Fracture Mechanics, 96: 588-605, http://dx.doi.org/10.1016/j.engfracmech.2012.09.013.

Karandikar, J., Schmitz, T., and Abbas, A., 2012, Spindle Speed Selection for Tool Life Testing Using Bayesian Inference, Journal of Manufacturing Systems, 31/4:403-411, http://dx.doi.org/10.1016/j.jmsy.2012.07.013.

Argibay, N., Susil, G., Ingley, C., Schmitz, T., Sawyer, W.G., and Bourne, G., 2012, In Situ Surface Hardening during Turning via Pyrolytic Carburization, Precision Engineering, 36/4: 668-672, http://dx.doi.org/10.1016/j.precisioneng.2012.04.007.

Ozturk, E., Kumar, U., Turner, S., and Schmitz, T., 2012, Investigation of Spindle Bearing Preload on Dynamics and Stability Limit in Milling, CIRP Annals – Manufacturing Technology, 61/1: 343-346, http://dx.doi.org/10.1016/j.cirp.2012.03.134.

Kumar, U. and Schmitz, T., 2012, Spindle Dynamics Identification for Receptance Coupling Substructure Analysis, Precision Engineering, 36/3: 435-443, http://dx.doi.org/10.1016/j.precisioneng.2012.01.007.

Schmitz, T., Adhia, C., and Kim, H.S., 2012, Periodic Error Quantification for Non-constant Velocity Motion, Precision Engineering, 36/1: 153-157, http://dx.doi.org/10.1016/j.precisioneng.2011.06.004.

Bediz, B., Kumar, U., Schmitz, T., and Ozdoganlar, O.B., 2011, Modeling and Experimentation for Three-dimensional Dynamics of Endmills, International Journal of Machine Tools and Manufacture, 53/1: 39-50,

http://dx.doi.org/10.1016/j.ijmachtools.2011.09.005.

Schmitz, T., Karandikar, J., Kim, N.H., and Abbas, A., 2011, Uncertainty in Machining: Workshop Summary and Contributions, Journal of Manufacturing Science and Engineering, 133/5: 051009, http://dx.doi.org/10.1115/1.4004923.

Ganguly, V., Kim, N.H., Kim, H.S., and Schmitz, T., 2011, Sensitivity Analysis of Periodic Error in Heterodyne Interferometry, Measurement Science and Technology, 22/3: 035305, http://iopscience.iop.org/0957-0233/22/3/035305/.

Kumanchik, L., Schmitz, T., and Pratt, J., 2011, Simultaneous Normal and Torsional Force Measurement by Cantilever Surface Contour Analysis, Measurement Science and Technology, 22: 055103, http://iopscience.iop.org/0957-0233/22/5/055103.

Graziano, A. and Schmitz, T., 2011, Sensor Design and Evaluation for On-machine Probing of Extruded Tool Joints, Precision Engineering,  35: 525–535, http://dx.doi.org/10.1016/j.precisioneng.2011.02.010.

An, D., Choi, J., Kim, N.H, and Schmitz, T., 2011, In-Situ Monitoring and Prediction of Progressive Joint Wear Using Bayesian Statistics, Wear, 270: 828-838, http://dx.doi.org/10.1016/j.wear.2011.02.010.

Kumanchik, L., Schmitz, T., and Pratt, J., 2011, An Interferometric Platform for Studying AFM Probe Deflection, Precision Engineering, 35: 248-257, http://dx.doi.org/10.1016/j.precisioneng.2010.09.013.

Schluchter, C., Ganguly, V., Chu, D., and Schmitz, T., 2011, Low Velocity Compensation for First Order Periodic Error Caused by Beam Shear, Precision Engineering, 35: 241-247, http://dx.doi.org/10.1016/j.precisioneng.2010.09.014.

Zhang, J., Schmitz, T., Zhao, W., and Lu, B., 2011, Receptance Coupling for Dynamics Prediction of a Fluted Tool, Chinese Journal of Mechanical Engineering, 24/3: 340-345.

Houck III, L., Schmitz, T., and Smith, K.S., 2011, Tuned Holder for Increased Boring Bar Dynamic Stiffness, Journal of Manufacturing Processes, 13: 24-29, http://dx.doi.org/10.1016/j.jmapro.2010.09.002.

Mukras, S., Kim, N.H., Mauntler, N., Schmitz, T., and Sawyer, W.G., 2010, Comparison between Elastic Foundation and Contact Force Models in Wear Analysis of Planar Multibody System, ASME Journal of Tribology, 132/3: 31604 (1-11), http://dx.doi.org/10.1115/1.4001786.

Bhattacharyya, A., Schueller, J., Mann, B., Ziegert, J., Schmitz, T., Taylor, F., and Fitz-Coy, N., 2010, A Closed Form Mechanistic Model for Helical Peripheral Milling of Ductile Metallic Alloys, International Journal of Machine Tools and Manufacture, 50: 538-551, http://dx.doi.org/10.1016/j.ijmachtools.2010.03.003.

Kim, H.S., Schmitz, T., and Beckwith, J., 2010, A New Heterodyne Interferometer with Zero Periodic Error and Tunable Beat Frequency, Part 1: Initial Design and Verification, Journal of Optics Research, 11/3: 213-244.

Kim, H.S., Schmitz, T., and Rueff, M., 2010, A New Heterodyne Interferometer with Zero Periodic Error and Tunable Beat Frequency, Part 2: Size Reduction, Journal of Optics Research, 11/3: 245-256.

Kim, H.S. and Schmitz, T., 2010, Periodic Error Calculation from Spectrum Analyzer Data, Precision Engineering, 34: 218-230, http://dx.doi.org/10.1016/j.precisioneng.2009.06.001.

Schmitz, T., 2010, Torsional and Axial Frequency Response Prediction by RCSA, Precision Engineering, 34: 345-356, http://dx.doi.org/10.1016/j.precisioneng.2009.08.005.

Mukras, S., Kim, N.H., Mauntler, N., Schmitz, T., and Sawyer, W.G., 2009, Analysis of Planar Multibody Systems with Revolute Joint Wear, Wear, 268/5-6: 643-652, http://dx.doi.org/10.1016/j.wear.2009.10.014.

Mukras, S., Kim, N.H., Mauntler, N., Schmitz, T., and Sawyer, W.G., 2009, Modeling a Slider-Crank Mechanism with Joint Wear, SAE International Journal of Passenger Cars – Mechanical Systems, 2/1: 600-612.

Schmitz, T., Chu, D., and Kim, H.S., 2009, First and Second Order Periodic Error Measurement for Non-constant Velocity Motions, Precision Engineering, 33: 353-361, http://dx.doi.org/10.1016/j.precisioneng.2008.10.001.

Zapata, R., Schmitz, T., Traverso, M., and Abbas, A., 2009, Value of Information and Experimentation in Milling Profit Optimization, International Journal of Mechatronics and Manufacturing Systems, 2/5-6: 580-599, http://inderscience.metapress.com/content/b7v07hm329737714/.

Abbas, A., Yang, L., Zapata, R., and Schmitz, T., 2009, Application of Decision Analysis to Milling Profit Maximisation: An Introduction, International Journal of Materials and Product Technology, 35/1-2: 64-88, http://inderscience.metapress.com/content/qh5711p6t2870852/.

Kurdi, M., Schmitz, T., Haftka, R., Mann, B., 2009, Milling Optimization of Removal Rate and Accuracy with Uncertainty – Part 1: Parameter Selection, International Journal of Materials and Product Technology, 35/1-2: 3-25, http://inderscience.metapress.com/content/f326j56637265l56/.

Kurdi, M., Schmitz, T., Haftka, R., Mann, B., 2009, Milling Optimization of Removal Rate and Accuracy with Uncertainty – Part 2: Parameter Variation, International Journal of Materials and Product Technology, 35/1-2: 22-46, http://inderscience.metapress.com/content/0013492242j54363/.

Bourne, G., Bardt, J., Sawyer, W.G., Ziegert, J., Zeenberg, D., and Schmitz, T., 2009, Closed Channel Fabrication Using Micromolding of Metallic Glass, Journal of Materials Processing Technology, 209/10: 4765-4768, http://dx.doi.org/10.1016/j.jmatprotec.2008.12.003.

Filiz, S., Cheng, C.-H, Powell, K., Schmitz, T., and Ozdoganlar, O., 2009, An Improved Tool-Holder Model for RCSA Tool-Point Frequency Response Prediction, Precision Engineering, 33: 26–36, http://dx.doi.org/10.1016/j.precisioneng.2008.03.003.

Kurdi, M., Haftka, R., Schmitz, T., and Mann, B., 2008, A Robust Semi-analytical Method for Calculating the Response Sensitivity of a Time Delay System, Journal of Vibrations and Acoustics, 130/6, http://dx.doi.org/10.1115/1.2981093.

Schmitz, T., Gardner, N., Vaughn, M., Medicus, K., and Davies, A., 2008, Improving Optical Bench Radius Measurements Using Stage Error Motion Data, Applied Optics, 47/36: 6692–6700, http://dx.doi.org/10.1364/AO.47.006692.

Lightcap, C., Hamner, S., Schmitz, T., and Banks, S., 2008, Improved Positioning Accuracy of the PA10-6CE Robot with Geometric and Flexibility Calibration, IEEE Transactions on Robotics, 24/2: 452-456, http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4451346.

Mauntler, N., Schmitz, T., and Ziegert, J., 2008, The Influence of Process Variation on a Cortical Bone Interference Fit Pin Connection, ASME Journal of Manufacturing Science and Engineering, 130/2: 024501, http://dx.doi.org/10.1115/1.2896103.

Schmitz, T., Ziegert, J., Canning, J.S., and Zapata, R., 2008, Case Study: A Comparison of Error Sources in Milling, Precision Engineering, 32/2: 126–133, http://dx.doi.org/10.1016/j.precisioneng.2007.06.001.

Kim, H.S. and Schmitz, T., 2008, An Investigation of Uncertainty in Impact Testing, CIRP Journal of Manufacturing Systems, 36/5.

Cheng, C.-H., Duncan, G.S., and Schmitz, T., 2007, Rotating Tool Point Frequency Response Prediction using RCSA, Machining Science and Technology, 11/3: 433-446, http://www.tandfonline.com/doi/abs/10.1080/10910340701539866.

Bardt, J., Bourne, G., Ziegert, J., Schmitz, T., and Sawyer, W.G., 2007, Micromolding Three-Dimensional Amorphous Metal Structures, Journal of Materials Research, 22/2: 339-343, http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=8112560.

Kim, H.S. and Schmitz, T., 2007, Bivariate Uncertainty Analysis for Impact Testing, Measurement Science and Technology, 18: 3565-3571, http://iopscience.iop.org/0957-0233/18/11/041.

Schmitz, T. and Kim, H.S., 2007, Monte Carlo Evaluation of Periodic Error Uncertainty, Precision Engineering, 31/3: 251-259, http://dx.doi.org/10.1016/j.precisioneng.2006.10.001.

Kumanchik, L. and Schmitz, T., 2007, Improved Analytical Chip Thickness Model for Milling, Precision Engineering, 31/3: 317-324, http://dx.doi.org/10.1016/j.precisioneng.2006.12.001.

Schmitz, T., Powell, K., Won, D., Duncan, G.S., Sawyer, W.G., and Ziegert, J., 2007, Shrink Fit Tool Holder Connection Stiffness/Damping Modeling for Frequency Response Prediction in Milling, International Journal of Machine Tools and Manufacture, 47/9: 1368-1380, http://dx.doi.org/10.1016/j.ijmachtools.2006.08.009.

Schmitz, T., Couey, J., Marsh, E., Mauntler, N., and Hughes, D., 2007, Runout Effects in Milling: Surface finish, Surface Location Error, and Stability, International Journal of Machine Tools and Manufacture, 47: 841-851, http://dx.doi.org/10.1016/j.ijmachtools.2006.06.014.

Canning, J.S., Ziegert, J., and Schmitz, T., 2007, Coordinate Metrology Uncertainty Using Parallel Kinematic Techniques, International Journal of Machine Tools and Manufacture, 47: 658-665, http://dx.doi.org/10.1016/j.ijmachtools.2006.04.010.

Schmitz, T., Chu, D. and Houck III, L., 2006, First Order Periodic Error Correction: Validation for Constant and Non-constant Velocities with Variable Error Magnitudes, Measurement Science and Technology, 17: 3195-3203, http://iopscience.iop.org/0957-0233/17/12/001.

Schmitz, T. and Mann, B., 2006, Closed Form Solutions for Surface Location Error in Milling, International Journal of Machine Tools and Manufacture, 46: 1369-1377, http://dx.doi.org/10.1016/j.ijmachtools.2005.10.007.

Ziegert, J., Stanislaus, C., Schmitz, T., and Sterling, R., 2006, Enhanced Damping in Long Slender Endmills, Journal of Manufacturing Processes, 8/1: 39-47, http://dx.doi.org/10.1016/S1526-6125(06)70100-1.

Schmitz, T., Houck III, L., Chu, D., and Kalem, L., 2006, Bench-top Setup for Validation of Real Time, Digital Periodic Error Correction, Precision Engineering, 30: 306-313, http://dx.doi.org/10.1016/j.precisioneng.2005.10.001.

Schmitz, T. and Duncan, G.S., 2006, Receptance Coupling for Dynamics Prediction of Assemblies with Coincident Neutral Axes, Journal of Sound and Vibration, 289/4-5: 1045-1065, http://dx.doi.org/10.1016/j.jsv.2005.03.006.

Sawyer, W.G., Ziegert, J., Schmitz, T., and Barton, T., 2006, In-Situ Lubrication with Boric Acid: Powder Delivery of an Environmentally Benign Solid Lubricant, Tribology Transactions, 49: 284-290, http://www.tandfonline.com/doi/abs/10.1080/05698190600639939.

Schmitz, T. and Duncan, G.S., 2005, Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction, Journal of Manufacturing Science and Engineering, 127/4: 781-790, http://dx.doi.org/10.1115/1.2039102.

Davies, A. and Schmitz, T., 2005, Correcting for Stage Error Motions in Radius Measurements, Applied Optics, 44/28: 5884-5893, http://dx.doi.org/10.1364/AO.44.005884.

Schmitz, T., Action, J., Ziegert, J., and Sawyer, W.G., 2005, On the Difficulty at Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements, Journal of Tribology, 127: 673-678, http://dx.doi.org/10.1115/1.1843853.

Duncan, G.S., Tummond, M., and Schmitz, T., 2005, An Investigation of the Dynamic Absorber Effect in High-Speed Machining, International Journal of Machine Tools and Manufacture, 45: 497-507, http://dx.doi.org/10.1016/j.ijmachtools.2004.09.005.

Mann, B., Young, K., Schmitz, T., and Dilley, D., 2005, Simultaneous Stability and Surface Location Error Predictions in Milling, Journal of Manufacturing Science and Engineering, 127: 446-453, http://dx.doi.org/10.1115/1.1948394.

Schmitz, T., Ziegert, J., Burns, T., Dutterer, B., and Winfough, W., 2004, Tool-Length Dependent Stability Surfaces, Machining Science and Technology, 8/3: 377-397, http://www.tandfonline.com/doi/abs/10.1081/MST-200038989.

Schmitz, T., Action, J., Burris, D., Ziegert, J., Sawyer, W.G., 2004, Wear Rate Uncertainty Analysis, Journal of Tribology, 126: 802-808 (2004 Best Paper Award), http://dx.doi.org/10.1115/1.1792675.

Schmitz, T., Dagata, J., Dutterer, B., and Sawyer, W., 2004, A Multi-Scale Fabrication Approach to Microfluidic System Development, Journal of Manufacturing Processes, 6/1: 88-96.

Schmitz, T., Action, J., Burris, D., Ziegert, J., Sawyer, W., 2004, Measurement Uncertainty in Tribological Wear Rate Testing, SME Technical Paper TP04PUB183, Transactions of NAMRI/SME, 32: 343-350.

Schmitz, T., Ziegert, J., and Stanislaus, C., 2004, A Method for Predicting Chatter Stability for Systems with Speed-Dependent Spindle Dynamics, SME Technical Paper TP04PUB182, Transactions of NAMRI/SME, 32: 17-24.

Davies, M., Yoon, H., Schmitz, T., Burns, T., and Kennedy, M., 2003, Calibrated High Resolution Thermal Microscopy of the Tool-Chip Interface in Machining, Machining Science and Technology, 7: 167-190, http://www.tandfonline.com/doi/abs/10.1081/MST-120022776.

Schmitz, T., Davies, A., Evans, C., and Parks, R., 2003, Silicon Wafer Thickness Variation Measurements using the NIST Infrared Interferometer, Optical Engineering, 42/8: 2281-2290, http://link.aip.org/link/doi/10.1117/1.1589757.

Schmitz, T., 2003, Chatter Recognition by a Statistical Evaluation of the Synchronously Sampled Audio Signal, Journal of Sound and Vibration, 262/3: 721-730.

Schmitz, T., 2002, Automatic Trimming of Machining Stability Lobes, International Journal of Machine Tools and Manufacture, 42: 1479-1486, http://dx.doi.org/10.1016/S0890-6955(02)00034-2.

Schmitz, T., Medicus, K., and Dutterer, B., 2002, Exploring Once-per-revolution Audio Signal Variance as a Chatter Indicator, Machining Science and Technology, 6/2: 215-233, http://www.tandfonline.com/doi/abs/10.1081/MST-120005957.

Schmitz, T. and Beckwith, J., 2002, An Investigation of Two Unexplored Periodic Error Sources in Differential-Path Interferometry, Precision Engineering, 27/3: 311-322, http://dx.doi.org/10.1016/S0141-6359(03)00036-9.

Schmitz, T. and Beckwith, J., 2002, Acousto-optic Displacement-Measuring Interferometer: A New Heterodyne Interferometer with Angstrom-Level Periodic Error, Journal of Modern Optics, 49/13: 2105-2114, http://www.tandfonline.com/doi/abs/10.1080/09500340210123938.

Schmitz, T., Evans, C., Davies, A., and Estler, W.T., 2002, Uncertainty in Interferometric Radius Measurements, Displacement Uncertainty in lnterferometric Radius Measurements, Annals of the CIRP, 51/1: 451-454, http://dx.doi.org/10.1016/S0007-8506(07)61558-3.

Schmitz, T., Davies, M., and Kennedy, M., 2001, Tool Point Frequency Response Prediction for High-Speed Machining by RCSA, Journal of Manufacturing Science and Engineering, 123: 700-707, http://dx.doi.org/10.1115/1.1392994.

Schmitz, T., Davies, M., Medicus, K., and Snyder, J., 2001, Improving High-Speed Machining Material Removal Rates by Rapid Dynamic Analysis, Annals of the CIRP, 50/1: 263-268, http://dx.doi.org/10.1016/S0007-8506(07)62119-2.

Schmitz, T., Davies, M., Dutterer, B., and Ziegert, J., 2001, The Application of High-Speed CNC Machining to Prototype Production, International Journal of Machine Tools and Manufacture, 41: 1209-1228, http://dx.doi.org/10.1016/S0890-6955(01)00005-0.

Schmitz, T. and Donaldson, R., 2000, Predicting High-Speed Machining Dynamics by Substructure Analysis, Annals of the CIRP, 49/1: 303-308, http://dx.doi.org/10.1016/S0007-8506(07)62951-5.

Schmitz, T. and Ziegert, J., 2000, Dynamic Evaluation of Spatial CNC Contouring Accuracy, Precision Engineering, 24/2: 99-118, http://dx.doi.org/10.1016/S0141-6359(99)00034-3.

Schmitz, T. and Ziegert, J., 1999, Examination of Surface Location Error Due to Phasing of Cutter Vibrations, Precision Engineering, 23/1: 51-62, http://dx.doi.org/10.1016/S0141-6359(98)00025-7.

Schmitz, T. and Ziegert, J., 1999, A New Sensor for the Micrometer-Level Measurement of 3-D, Dynamic Contours, Measurement Science and Technology, 10/2: 51-62 (1999 Highly Commended Article), http://iopscience.iop.org/0957-0233/10/2/001.

Schmitz, T. and Ziegert, J., 1998, Premachining CNC Contour Validation, Precision Engineering, 22/1: 10-18, http://dx.doi.org/10.1016/S0141-6359(97)00086-X.