Publications

Journals

  1. ChaBum Lee, Seongkyul Jeon, Christopher Stapanick and Joshua A. Tarbutton (2016) “Fundamental Parameters Analysis of Knife Edge Diffraction-Utilized Displacement Sensor”, Review of Scientific Instruments,
  2. Andrey Balabohkin, Joshua A. Tarbutton, (2016) “Automatic Generalized Cutter Selection for Finishing of Free-Form Surfaces in 3-Axis CNC Milling by Surface Tolerance and Tool Performance Metrics”, The International Journal of Advanced Manufacturing Technology,
  1. ChaBum Lee, Christopher K. Stepanick, Sun-Kyu Lee and Joshua A. Tarbutton, (2016) “Cross-coupling effect of large range XY nanopositioning stage fabricated by stereolithography process”, Precision Engineering, Accepted.
  2. Chao Lu, John R. Troutman, Tony L. Schmitz, Jonathan D. Ellis, Joshua A. Tarbutton, (2016) “Application of the continuous wavelet transform in periodic error compensation”, Precision Engineering, Available online 23 January 2016, ISSN 0141-6359,
  3. ChaBum Lee, Sun-Kyu Lee and Joshua A Tarbutton, (2015) “Positioning control effectiveness of optical knife edge displacement sensor-embedded monolithic precision stage”, Sens. Actuators A. (In print).
  4. ChaBum Lee and Joshua A Tarbutton, (2015) “Electric poling-assisted additive manufacturing process for lead-free piezoelectric device fabrication”, Procedia Manufacturing, 1, 320-326.
  5. Omid Yousefian and Joshua Tarbutton, (2015) “Prediction of cutting force in 3-axis CNC milling machines based on voxellization framework for digital manufacturing Procedia Manufacturing, 1, 512-521.
  6. ChaBum Lee and Joshua A Tarbutton, (2015) “Compliance and control characteristics of an additive manufactured-flexure stage”, Rev. Sci. Instrum. 86(4) 045107.
  7. Gouda, K.M., Tarbutton, Joshua A., (2015) Bayoumi, Abdel, “A Wavelet-Based Index for Fault Detection and Its Application in Condition Monitoring of Helicopter Drive-train Components”, International Journal of Manufacturing Research
  8. ChaBum Lee, Sun-Kyu Lee and Joshua A, Tarbutton (2014), “Novel design and sensitivity analysis of displacement measurement system utilizing knife edge diffraction for nanopositioning stages”, Review of Scientific Instruments, 85, 095113.
  9. ChaBum Lee and Joshua A. Tarbutton (2014), “Electric poling-assisted additive manufacturing process for PVDF polymer-based piezoelectric device applications”, Smart Materials and Structures, 23, 095044, 2014. (Featured Article)
  10. Hassan, Mohammad, Tarbutton, J, Bayoumi, Abdel, Shin, Yong-June (2014), “Condition Monitoring of Helicopter Drive-Shafts Using Quadratic-Nonlinearity Metric Based on Cross-Bispectrum”, IEEE Transactions on Aerospace and Electronic Systems (TAES).
  11. Tarbutton, J., Kurfess, T. R., Tucker, T., & Konobrytskyi, D. (2013). “Gouge-free voxel-based machining for parallel processors”. The International Journal of Advanced Manufacturing Technology, 1-13.
  12. Tarbutton, J., T.R. Kurfess, and T.M. Tucker (2010), “Graphics Based Path Planning for Multi-Axis Machine Tools”. CAD  and Applications, 6 (7), pp. 835-845.
  13. Limroth, J., J. Tarbutton, and T. R. Kurfess (2008), “Review of recent patents relating to graphical embedded programming.” Recent Patents on Electrical Engineering, 1, 155-163.
  14. Tarbutton, J., and T. R. Kurfess (2008). “Modeling and system identification of a high precision measurement machine.” International Journal of Manufacturing, 3, 198-215.
  15. Tarbutton, J., and T. R. Kurfess (2008) “Auto-tuning of a high precision measurement machine” 2008 Transaction of the NARMI, 121-128.

 

Conference Proceedings

  1. De Backer, W., Harik, W., van Tooren, M., Tarbutton, J., & Gurdal, Z. (2016, may). A framework for automated additive-subtractive manufacturing of multi-material composites. In 11th International Symposium on Tools and Methods of Competitive Engineering, TMCE2016, Aix-en-Provence, France
  1. ChaBum Lee, Hwan-Sik Yoon, Kwun-Lon Ting, Joshua A. Tarbutton, Jonathan D. Ellis, and Sun-Kyu Lee, “On-machine measurment of cutting tool damage based on optical knife-edge diffraction,” 15th Annual Early Career Conference, Burmingham AL, USA, Nov. 7~8, 2015.
  2. ChaBum Lee, Sun-Kyu Lee and Joshua A Tarbutton, “Novel displacement sensing technique utilizing knife edge diffraction,” ASPE Annual Meeting, Austin TX, USA, Nov. 1~6, 2015.
  3. C Lu, J. A. Tabutton, C. Lee, J. D. Ellis, and T. L. Schmitz, “Improvement of a periodic error compensation algorithm based on the continuous wavelet transform,” ASPE Annual Meeting, Austin TX, USA, Nov. 1~6, 2015.
  4. Herminso Villarraga, ChaBum Lee, Steven P. Charney, Joshua A. Tarbutton, and Stuart T. Smith “Dimensional metrology of complex geometries built by additive manufacturing”, ASPE Topical Meeting , Raleigh, NC, USA, April 26-29, 2015
  5. Chabum Lee, Rajib Mahamud, Tanvir Farouk, and Joshua A Tarbutton,  “Preliminary Study of Corona-assisted Additive Manufacturing Process of Piezoelectric Thermoplastic”, ASPE Topical
    Meeting , Raleigh, NC, USA, April 26-29, 2015.
  6. ChaBum Lee and Joshua A Tarbutton, “Electric poling-assisted additive manufacturing process for lead-free piezoelectric device fabrication”, SME NAMRC 2015, Charlotte NC, USA.
  7. Omid Yousefian and Joshua Tarbutton, “Prediction of cutting force in 3-axis CNC milling machines based on voxellization framework for digital manufacturing”, SME NAMRC 2015, Charlotte NC, USA.
  8. Herminso Villarraga, ChaBum Lee, Taylor Corbett, Joshua A. Tarbutton and Stuart T. Smith, “Assessing additive manufacturing processes with X-ray metrology, ASPE Topical
    Meeting , Raleigh, NC, USA, April 26-29, 2015
  9. Lu, C, Tarbutton, J., Troutman, J., Schmitz, T. L., Ellis, J. D. Periodic error compensation using frequency measurement with continuous wavelet transform, ASPE 2014 Meeting, Nov. 9-14, Boston MA.
  10. Taylor Corbett, ChaBum Lee, Joshua A. Tarbutton, Fatigue property development and optimization of additive manufactured Acrylonitrile Butadiene Styrene Parts, RAPID 2014, June 9-12, Detroit MI, USA.
  11. Taylor Corbett, ChaBum Lee, Joshua A. Tarbutton, Identification of mechanical and fatigue characteristics of polymers fabricated by additive manufacturing process, Proceedings of the ASPE Summer Topical Meeting, April 13-16, 2014, Berkeley, CA, USA.
  12. Kareem Gouda, Joshua Tarbutton, Jake McVay, Abdel Bayoumi, Nanolubricant oil additives for performance improvement of the intermediate gearbox in the AH-64D helicopter, AHS 70th Annual Forum, May 20 – 22, 2014, Quebec Canada.
  13. Lu, C, S.G. Gillmer, J.D Ellis, T.L. Schmitz, J.A. Tarbutton, “Application of Wavelet Analysis in Heterodyne Interferometry”, 28th ASPE Annual Meeting, 20–25 Oct 2013, St. Paul, MN, USA
  14. Konobrytskyi, D., T. Tucker, T. R. Kurfess, J. A. Tarbutton, “GPGPU Accelerated 3-Axis CNC Machining Simulation”, MSEC 2013, June 10-14, 2013, Madison, WI, USA.
  15. Travis Edwards, Thomas Hartmann, Andrew Patterson, Samuel Bernstel, Joshua Tarbutton, Abdel Bayoumi, Damian Carr, Lester Eisner. “AH-64D Swashplate Test Stands – Improving Understanding of Component Behavior in Rotorcraft Swashplates through External Sensors” AHS Airworthiness, CBM, and HUMS Specialists’ Meeting, Feb 2013.
  16. Kareem Gouda, Mohsen Nikhoo, Steve Marcous, Abdel Bayoumi, Joshua Tarbutton, Kenneth Eberts, Ganesh Skandan, Damian Carr, Lester Eisner. “A Study of Nanoparticle Additives on the Performance of the AH-64 Intermediate Gearbox Lubricant to Achieve CBM Objectives.” AHS Airworthiness, CBM, and HUMS Specialists’ Meeting, Feb 2013.
  17. Mohammed A. Hassan, Yong June-Shin, Abdel E. Bayoumi, Joshua Tarbutton, Lester Eisner, Jerry Higman. “Nonlinear Vibration-Interaction Metric for Health Assessment of Helicopter Drivetrain Systems.” AHS Airworthiness, CBM, and HUMS Specialists’ Meeting, Feb 2013.
  18. Ellis, J.D., S.G. Gillmer, C. Wang, R. Smith, S.C. Woody, J.A. Tarbutton, “Fiber-coupled 3-DOF Interferometer for EUV Lithography Stage Metrology”, Proceedings of the ASPE Summer Topical Meeting – Precision Engineering and Mechatronics Supporting the Semiconductor Industry – June 24-26, 2012, Berkeley, CA, USA
  19. Mangel, A.R., S.M. Moysey, J.C. Ryan, and J.A. Tarbutton, “Automated multi-offset ground penetrating radar data collection for monitoring lab-scale infiltration experiments”, SEG Expanded Abstracts, 29, 3774, doi:10.1190/1.3513635, 2010.
  20. Tarbutton, J., T.R. Kurfess, and T.M. Tucker (2010), “Machining by Ray Casting into voxel models”. 2010 International Symposium on Flexible Automation. Tokyo, Japan July 12-14, 2010 UPL-2503.
  21. Qaroush, Y., M. F. Daqaq,  R. Saeidpourazar, J. Tarbutton, and N. Jalili,  (2009) “Feedback Delays for Vibration Mitigation and External Disturbance Rejection at the Microscale”. 50th  IAA/ASME/ASCE /AHS /ASC Structures, Structural Dynamics, and Materials Conference. 4-8 May, 2009.